Dongguan Yana Textile Co., Ltd.

Today's simple analysis of the classification of cashmere yarn
Cashmere yarns are divided into: roving, worsted and semi-worsted yarns according to the production process. The coarse-spun yarn is relatively thick and the number of branches is relatively low, generally from 14 to 32
The semi-worsted yarns are relatively fine and the number of branches is relatively high. Generally, the yarns from 24 to 60 worsted yarns are relatively thin, and the number of branches is relatively high, generally from 28 to 120.
Our commonly used hand-knitted cashmere weaving thread is a woollen yarn, ordinary cashmere sweater is also a woollen yarn, and spring and summer ultra-thin cashmere fashion, t-shirt and cashmere underwear are generally worsted cashmere yarn. Semi-worsted cashmere yarn is The new products developed in recent years are being accepted and tested by the knitting factory, and the effect is not bad.
The difference between cashmere knitting yarn and cashmere knitting thread:
Cashmere knitting yarn is mainly used for flat knitting, including coarse yarn, worsted yarn and semi-worsted yarn. For 3 needles, 5 needles, 7 needles, 9 needles, 12 needles, 14 needles, 16 needles, 18 needles. Knitting of shirts. Cashmere weaving threads are mainly used for hand-knitted knitting, mainly for roving, but also for multi-strand yarns of worsted and semi-spun yarns. Production equipment and crafts are different from cashmere knitting yarns.
Cashmere yarn is divided into: 100% cashmere yarn and cashmere blended yarn, and yarns with cashmere content below 95% are classified into cashmere blended yarn. The raw materials that can be blended with cashmere are silk, cotton, Wool and newly developed milk protein fiber and soy fiber. According to market needs, there will be more varieties to join.
Cashmere yarn is the direct raw material for cashmere sweaters. The quality of cashmere sweaters depends directly on the quality of cashmere yarns. The proper strength and strength and uniform yarn drying, as well as the length and fineness of the material selected (cashmere raw materials) The quality grade of cashmere yarn. Different grades determine different price points, so consumers or knitting factories must start from their own needs when buying cashmere yarn, carefully discerning, do not blindly pursue cheaper prices. Cashmere sweaters will have serious pilling and hair loss, which will seriously shorten the service life of cashmere sweaters. Carefully, instead of spending money on these cheap cashmere sweaters, it is better to spend a little more money to buy genuine cashmere sweaters. Good quality cashmere sweaters can be worn for 10 years if properly maintained! It is concluded that the choice of cashmere yarn is important! But the key is that you need to know how to distinguish. If you are not fully grasped, it is recommended that you go to the authority for testing. Although it will incur a certain amount of testing costs, it does give you peace of mind.
Cashmere number
The yarn number is generally three digits. The first one represents the raw material of the yarn and is represented by 0~9. The latter two digits represent the count of the single yarn. The larger the number, the finer the yarn, and the more the number of stitches per small twist. There is a 4 word before the three digits to indicate the prototype.
In short, the “yarn branch” refers to the thickness of the yarn. China’s current general-purpose “English system” means:
One pound (454 grams) of heavy cotton yarn (or other component yarn), when the length is 840 yards (0.9144 yards / meter), the yarn has a fineness of one. If a pound of yarn, its length is 10 × 840 yards, its fineness is 10, and so on.
The representation of the yarn count: the English symbol is the English letter "s"
The representation of a single yarn is: 32 single yarns ------- expressed as: 32s
The representation of the strands is: 32 strands (two twists and turns) are: 32s/2, 42 sticks and not only: 42s/3.
The first number on the trademark indicates the raw material of the yarn. Such as:
"1" means domestic wool
"2" means imported wool
“3” means imported wool and viscose blend
“4” means new product
“5” means domestic wool and viscose blend
“6” means imported wool is acrylic blend
“7” means domestic wool is acrylic blend
"8" means pure nylon
The last two digits on the mark indicate the yarn branch of the yarn. The larger the number of yarn feeders, the finer the yarn, such as the 24 strands are thinner than the 13 strands. for example:
If the number of the wool trademark is "213", it means 13 lines of imported wool, "124" is 24 lines of domestic wool, and the rest are analogous.
A unit that indicates the degree of fiber or yarn thickness.
The length of the unit component of a fiber or yarn at a given moisture regain rate is indicated. Due to the different calculation unit system, it is usually divided into two types: metric count and imperial count.
1 metric count. The length (meters) of a 1 gram fiber or yarn at a given moisture regain. The finer the fiber or yarn, the higher the metric count. Hemp and wool yarns, wool-type chemical fiber pure-spun, blended yarns, and the thickness of twisted-yarn and ramie yarns are indicated by metric counts. The number of public shares of the strand is indicated by dividing the nominal number of single yarns that make up the strand by the number of shares.
2 inch counts. One pound (453, 5 grams) of cotton is spun into a 840 yards (one yard is equal to 0, 9144 meters), the length of the cotton yarn is a yarn; spinning into 8400 yards is 10 yarns, the number of counts, the finer the yarn The better the quality of natural cotton fiber, the number of counts 21, 32, 38, 42, 46, 60s ÷ 2, etc. (s÷2) is the mark of the double strand. The more the count, the better the quality. The English count is indicated by the English letter s, which is converted into a rice gram of 1 s = 1.69336 m gram. As long as the length and weight of a bundle of yarn are known, it is not difficult to calculate the yarn count, namely: The number = meters long and the weight is 1.69336. This kind of schematic method is inconvenient to calculate, and the countries in use today are decreasing. The method of indicating the inch count of the strand is similar to the metric count. In addition to the above two methods, the Turks and Dan units are commonly used internationally. The tex is referred to as a special number, also known as the number, which is indicated by the weight (g) of a 1000 m long fiber or yarn at a given moisture regain.
Cashmere yarn count
The count indicates the unit of the degree of fiber or yarn thickness. The length of the unit component of a fiber or yarn at a given moisture regain rate is indicated. Due to the different calculation unit system, it is usually divided into two types: metric count and imperial count.
1 metric count. The length (meters) of a 1 gram fiber or yarn at a given moisture regain. The finer the fiber or yarn, the higher the metric count. Hemp and wool yarns, wool-type chemical fiber pure-spun, blended yarns, and the thickness of twisted-yarn and ramie yarns are indicated by metric counts. The number of public shares of the strand is indicated by dividing the nominal number of single yarns that make up the strand by the number of shares.
2 inch counts. One pound (453, 5 grams) of cotton is spun into a 840 yards (one yard is equal to 0, 9144 meters), the length of the cotton yarn is a yarn; spinning into 8400 yards is 10 yarns, the number of counts, the finer the yarn The better the quality of natural cotton fiber, the number of counts 21, 32, 38, 42, 46, 60s ÷ 2, etc. (s÷2) is the mark of the double strand. The more the count, the better the quality. The English count is indicated by the English letter s, which is converted into a rice gram of 1 s = 1.69336 m gram. As long as the length and weight of a bundle of yarn are known, it is not difficult to calculate the yarn count, namely: The number = meters long and the weight is 1.69336. This kind of schematic method is inconvenient to calculate, and the countries in use today are decreasing. The method of indicating the inch count of the strand is similar to the metric count. In addition to the above two methods, the Turks and Dan units are commonly used internationally. Tex (tex) is abbreviated as special number, also known as the number, with the weight of 1000 meters of fiber or yarn at the specified moisture regain (g)